skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Precise Manipulation of Multilength Scale Morphology and Its Influence on Eco‐Friendly Printed All‐Polymer Solar Cells

Journal Article · · Advanced Functional Materials
ORCiD logo [1];  [1];  [2];  [1];  [3];  [1];  [1];  [2];  [3];  [1]
  1. Department of Physics, Organic and Carbon Electronics Lab (ORaCEL) North Carolina State University Raleigh NC 27695 USA
  2. State Key Laboratory of Polymer Physics and Chemistry Beijing National Laboratory for Molecular Sciences Institute of Chemistry Chinese Academy of Sciences Beijing 100190 P. R. China
  3. Department of Mechanical and Aerospace Engineering and ORaCEL North Carolina State University Raleigh NC 27695 USA

Significant efforts have lead to demonstrations of nonfullerene solar cells (NFSCs) with record power conversion efficiency up to ≈13% for polymer:small molecule blends and ≈9% for all‐polymer blends. However, the control of morphology in NFSCs based on polymer blends is very challenging and a key obstacle to pushing this technology to eventual commercialization. The relations between phases at various length scales and photovoltaic parameters of all‐polymer bulk‐heterojunctions remain poorly understood and seldom explored. Here, precise control over a multilength scale morphology and photovoltaic performance are demonstrated by simply altering the concentration of a green solvent additive used in blade‐coated films. Resonant soft X‐ray scattering is used to elucidate the multiphasic morphology of these printed all‐polymeric films and complements with the use of grazing incidence wide‐angle X‐ray scattering and in situ spectroscopic ellipsometry characterizations to correlate the morphology parameters at different length scales to the device performance metrics. Benefiting from the highest relative volume fraction of small domains, additive‐free solar cells show the best device performance, strengthening the advantage of single benign solvent approach. This study also highlights the importance of high volume fraction of smallest domains in printed NFSCs and organic solar cells in general.

Sponsoring Organization:
USDOE
Grant/Contract Number:
DE‐AC02‐05CH11231
OSTI ID:
1378306
Journal Information:
Advanced Functional Materials, Journal Name: Advanced Functional Materials Vol. 27 Journal Issue: 33; ISSN 1616-301X
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
Germany
Language:
English
Citation Metrics:
Cited by: 93 works
Citation information provided by
Web of Science

References (54)

Charge Creation and Recombination in Multi-Length Scale Polymer:Fullerene BHJ Solar Cell Morphologies journal June 2016
Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain journal June 2014
Evolution of Laterally Phase-Separated Polyfluorene Blend Morphology Studied by X-ray Spectromicroscopy journal May 2009
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics journal March 2016
Single-Junction Binary-Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency journal March 2017
Interferometer-controlled scanning transmission X-ray microscopes at the Advanced Light Source journal February 2003
Single-junction polymer solar cells with high efficiency and photovoltage journal February 2015
Improved Performance of All-Polymer Solar Cells Enabled by Naphthodiperylenetetraimide-Based Polymer Acceptor journal May 2017
Morphological characterization of fullerene and fullerene-free organic photovoltaics by combined real and reciprocal space techniques journal May 2017
Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis journal April 2012
A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator journal October 2010
Nanomorphology of Bulk Heterojunction Photovoltaic Thin Films Probed with Resonant Soft X-ray Scattering journal August 2010
Morphology changes upon scaling a high-efficiency, solution-processed solar cell journal January 2016
Charge Generation Pathways in Organic Solar Cells: Assessing the Contribution from the Electron Acceptor journal June 2016
From Fullerene–Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control journal October 2016
Parallelized Nanopillar Perovskites for Semitransparent Solar Cells Using an Anodized Aluminum Oxide Scaffold journal July 2016
Morphology of all-polymer solar cells journal January 2012
Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend journal March 2017
Quantitative compositional analysis of organic thin films using transmission NEXAFS spectroscopy in an X-ray microscope journal August 2012
Diluting concentrated solution: a general, simple and effective approach to enhance efficiency of polymer solar cells journal January 2015
In Situ Morphology Studies of the Mechanism for Solution Additive Effects on the Formation of Bulk Heterojunction Films journal September 2014
Green-Solvent-Processed All-Polymer Solar Cells Containing a Perylene Diimide-Based Acceptor with an Efficiency over 6.5% journal December 2015
High Performance All-Polymer Solar Cell via Polymer Side-Chain Engineering journal March 2014
A real-time study of the benefits of co-solvents in polymer solar cell processing journal February 2015
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends journal July 2013
Green-solvent-processable organic solar cells journal November 2016
All-Polymer Solar Cells Employing Non-Halogenated Solvent and Additive journal July 2016
Correlating the Efficiency and Nanomorphology of Polymer Blend Solar Cells Utilizing Resonant Soft X-ray Scattering journal December 2011
Non-Fullerene Electron Acceptors for Use in Organic Solar Cells journal October 2015
Manipulation of Domain Purity and Orientational Ordering in High Performance All-Polymer Solar Cells journal August 2016
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells journal November 2014
Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation journal February 2015
Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells journal September 2016
Nika : software for two-dimensional data reduction journal March 2012
Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films journal April 2012
Non-fullerene acceptors for organic photovoltaics: an emerging horizon journal January 2014
All-Polymer Solar Cells Based on Absorption-Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27% journal December 2015
Morphology control strategies for solution-processed organic semiconductor thin films journal January 2014
Flow-enhanced solution printing of all-polymer solar cells journal August 2015
Correlation between Phase-Separated Domain Sizes of Active Layer and Photovoltaic Performances in All-Polymer Solar Cells journal July 2016
Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9% journal January 2017
Manipulating Aggregation and Molecular Orientation in All-Polymer Photovoltaic Cells journal August 2015
High Performance Organic Solar Cells Processed by Blade Coating in Air from a Benign Food Additive Solution journal October 2016
Effect of Processing Additives on the Solidification of Blade-Coated Polymer/Fullerene Blend Films via In-Situ Structure Measurements journal April 2013
Oligomer Molecules for Efficient Organic Photovoltaics journal November 2015
Donor polymer design enables efficient non-fullerene organic solar cells journal October 2016
Intensity Dependence of Current–Voltage Characteristics and Recombination in High-Efficiency Solution-Processed Small-Molecule Solar Cells journal April 2013
Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells journal November 2016
High-Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi-Length Scale Morphology and Device Performance journal December 2016
7.7% Efficient All-Polymer Solar Cells journal July 2015
High-Efficiency All-Polymer Solar Cells Based on a Pair of Crystalline Low-Bandgap Polymers journal September 2014
Exploiting Noncovalently Conformational Locking as a Design Strategy for High Performance Fused-Ring Electron Acceptor Used in Polymer Solar Cells journal February 2017
Polymer donor–polymer acceptor (all-polymer) solar cells journal April 2013
In Situ X-ray Scattering Studies of the Influence of an Additive on the Formation of a Low-Bandgap Bulk Heterojunction journal February 2017

Similar Records

Related Subjects