skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Neutron-Rich Isotope Production Using a Uranium Carbide Carbon Nanotubes SPES Target Prototype

Journal Article · · European Physical Journal. A

The SPES (Selective Production of Exotic Species) project, under development at the Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro (INFN-LNL), is a new-generation Isotope Separation On-Line (ISOL) facility for the production of radioactive ion beams by means of the proton-induced fission of uranium. In the framework of the research on the SPES target, seven uranium carbide discs, obtained by reacting uranium oxide with graphite and carbon nanotubes, were irradiated with protons at the Holifield Radioactive Ion Beam Facility (HRIBF) of Oak Ridge National Laboratory (ORNL). In the following, the yields of several fission products obtained during the experiment are presented and discussed. The experimental results are then compared to those obtained using a standard uranium carbide target. The reported data highlights the capability of the new type of SPES target to produce and release isotopes of interest for the nuclear physics community.

Research Organization:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC05-00OR22725
OSTI ID:
1090532
Journal Information:
European Physical Journal. A, Vol. 49, Issue 5; ISSN 1434-6001
Country of Publication:
United States
Language:
English

References (29)

Physics with Reaccelerated ISOL Beams journal February 2010
The SPES multi-foil direct target
  • Andrighetto, A.; Biasetto, L.; Manzolaro, M.
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 266, Issue 19-20 https://doi.org/10.1016/j.nimb.2008.05.134
journal October 2008
Multifoil UCx target for the SPES project --An update journal December 2006
Production of high-intensity RIB at SPES journal March 2010
ISAC target operation with high proton currents journal May 2003
Design of high-power ISOL targets for radioactive ion beam generation
  • Zhang, Y.; Alton, G. D.
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 521, Issue 1 https://doi.org/10.1016/j.nima.2003.11.419
journal March 2004
Use of refractory oxides, carbides and borides as targets for on-line mass separation journal May 1987
Characterization studies of prototype ISOL targets for the RIA
  • Greene, John P.; Burtseva, Tatiana; Neubauer, Janelle
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 241, Issue 1-4 https://doi.org/10.1016/j.nimb.2005.07.182
journal December 2005
Lanthanum carbide-based porous materials from carburization of lanthanum oxide and lanthanum oxalate mixtures journal August 2008
Fabrication of mesoporous and high specific surface area lanthanum carbide–carbon nanotube composites journal April 2009
Effect of Surface Porosity on Emittance of an Opaque Substance journal April 1969
Developing uranium dicarbide–graphite porous materials for the SPES project journal September 2010
Heterostructures of Single-Walled Carbon Nanotubes and Carbide Nanorods journal September 1999
Study on poly(methyl methacrylate)/carbon nanotube composites journal November 1999
A study of the electrical properties of carbon nanotube-NiFe2O4 composites: Effect of the surface treatment of the carbon nanotubes journal January 2005
Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites journal February 2004
SiC-coated carbon nanotubes and their application as reinforcements for cemented carbides journal September 2004
Neutron-rich isotope production using the uranium carbide multi-foil SPES target prototype journal March 2011
Emissivity measurements of opaque gray bodies up to 2000 °C by a dual-frequency pyrometer journal November 2008
An off-line method to characterize the fission product release from uranium carbide-target prototypes developed for SPIRAL2 project journal October 2012
Development of the HRIBF 25-MV tandem accelerator as a RIB accelerator
  • Meigs, M. J.; Haynes, D. L.; Jones, C. M.
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 382, Issue 1-2 https://doi.org/10.1016/S0168-9002(96)00390-7
journal November 1996
ISOL science at the Holifield Radioactive Ion Beam Facility journal January 2011
A new concept for a compact tape transport system journal July 1981
First on-line results for As and F beams from HRIBF target/ion sources journal April 1997
Temperature dependence of yields from multi-foil SPES target journal October 2011
Calculations and first results obtained with a SiC prototype of the SPES direct target
  • Barbui, M.; Andrighetto, A.; Antonucci, C.
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 266, Issue 19-20 https://doi.org/10.1016/j.nimb.2008.05.049
journal October 2008
Nuclear Data Sheets for A = 92 journal November 2000
Absolute branching intensities in the decay of Rb 92 to Sr 92 journal July 2006
Investigation of the release properties of MeCx targets at IRIS
  • Barzakh, A. E.; Besnosjuck, V. I.; Chubukov, I. Ya.
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 126, Issue 1-4 https://doi.org/10.1016/S0168-583X(97)01083-5
journal April 1997

Similar Records

Photo-ionization of aluminum in a hot cavity for the selective production of exotic species project
Journal Article · Sat Feb 15 00:00:00 EST 2014 · Review of Scientific Instruments · OSTI ID:1090532

The SPES Direct Target Project at the Laboratori Nazionali di Legnaro
Journal Article · Fri Oct 26 00:00:00 EDT 2007 · AIP Conference Proceedings · OSTI ID:1090532

The SPES project: an ISOL facility for exotic beams
Journal Article · Mon May 04 00:00:00 EDT 2009 · AIP Conference Proceedings · OSTI ID:1090532

Related Subjects