Prediction of non-equilibrium solidification modes in austenitic stainless steel laser welds
A primary austenitic, non-equilibrium mode of solidification can be induced in many 300 series austenitic stainless steels by laser welding and other rapid solidification techniques. The change in solidification mode can often result in a fully austenitic microstructure compared to the two phase ferrite plus austenite microstructure that is commonly found after primary ferrite solidification. A predictive capability for the solidification mode under rapid solidification conditions such as laser welding is needed since the microstructure and properties are closely related to solidification behavior. Conventional constitutional diagrams do not predict with any reliability the change to non-equilibrium austenitic solidification mode. Several means that have been attempted to predict the solidification behavior under extreme conditions are reviewed. The Cr{sub EQ}/Ni{sub EQ} ratio is shown to be unreliable, at least with the equivalence factors commonly used. Theoretical calculations of growth rate competition between ferrite and austenite solidification show promise, but some ambiguity results from inaccuracy in thermophysical material parameters. Use of calculated thermodynamic parameters such as equilibrium and non-equilibrium liquidus and solidus temperatures also shows some promise. However, this approach is not completely satisfactory and reliable either. It is concluded that a reliable and accurate method for predicting the tendency of austenitic stainless steels to solidify in the non-equilibrium mode is not yet available.
- Research Organization:
- Oak Ridge National Lab., TN (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 10178552
- Report Number(s):
- CONF-930202-11; ON: DE93018457
- Resource Relation:
- Conference: Annual meeting of the Metallurgical Society,Denver, CO (United States),21-25 Feb 1993; Other Information: PBD: [1993]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Non-equilibrium solidification in austenitic stainless steel welds
Investigation of the Effect of Chrome and Nickel Concentrations During Two-Piston Splat Quenching of Austenitic Stainless Steels