skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Target Area design basis and system performance for the National Ignition Facility. Revision 1

Conference ·
OSTI ID:100104
; ; ; ; ;  [1]; ; ;  [2]
  1. Lawrence Livermore National Lab., CA (United States)
  2. Sandia National Labs., Albuquerque, NM (United States)

The NIF Target Area is designed to confine the ICF target experiments leading up to and including fusion ignition and gain. The Target Area will provide appropriate in-chamber conditions before, during, and after each shot. The repeated introduction of large amounts of laser energy into the chamber and emission of fusion energy from targets represents a new challenge in ICF facility design. Prior to a shot, the facility provides proper illumination geometry, target chamber vacuum, and a stable platform for the target and its diagnostics. During a shot, the impact of the energy introduced into the chamber is minimized, and workers and the public are protected from excessive prompt radiation doses. After the shot, the residual radioactivation is managed to allow required accessibility. Tritium and other radioactive wastes are confined and disposed of. Diagnostic data is also retrieved, and the facility is readied for the next shot. The Target Area will accommodate yields up to 20 MJ, and its design lifetime is 30 years. The Target Area provides the personnel access needed to support the use precision diagnostics. The annual shot mix for design purposes is shown. Designing to this experimental envelope ensures the ability and flexibility to move through the experimental campaign to ignition efficiently.

Research Organization:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
100104
Report Number(s):
UCRL-JC-115583-Rev.1; CONF-941001-16-Rev.1; ON: DE95014687; TRN: 95:019231
Resource Relation:
Conference: 41. annual American Vacuum Society symposium, Denver, CO (United States), 24-28 Oct 1994; Other Information: PBD: Oct 1994
Country of Publication:
United States
Language:
English